Fortress-technologies ecure Wireless Access Bridge Manuel d'utilisateur Page 85
- Page / 144
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Fortress Bridge: Monitoring and Diagnostics
75
5.5 Diagnostics
NOTE: Radio 1
uses antenna port
1
(ANT1); Radio 2 uses
antenna port 2 (ANT2).
Access Fortress Bridge diagnostic utilities by logging into the
Bridge GUI admin account and selecting
DIAGNOSTICS from the
menu on the left.
The
DIAGNOSTICS screen displays:
The version and build number of the firmware currently
running on the Fortress Bridge, under
SOFTWARE VERSION.
The DEVICE ID of the Fortress Bridge, as uniquely generated
for each device on a Fortress-secured network and used,
when applicable, for device authentication. (Refer to
Section 4.1 for more information about Device IDs.)
5.5.1 Pinging a Device
1 Log on to the Bridge GUI admin or operator account and
choose
DIAGNOSTICS from the menu on the left.
2 On the DIAGNOSTICS screen under UTILITIES, in Ping IP
Address, enter the IP address of the device you want to
ping.
3 Click GO. The Bridge will ping the target IP five times and
display the
PING RESULTS.
5.5.2 Tracing a Packet Route
1 Log on to the Bridge GUI admin or operator account and
choose
DIAGNOSTICS from the menu on the left.
2 On the DIAGNOSTICS screen under UTILITIES, in Traceroute
IP Address, enter the IP address of the device to which you
want to trace the route.
3 Click GO. The Bridge will trace the route to the target IP and
display the
TRACEROUTE RESULTS.
detail:
- Secure Wireless 1
- Access Bridge 1
- Fortress Bridge 3
- Table of Contents 5
- Configuration 21 6
- Administration 52 7
- Command-Line Interface 80 8
- Chapter 1 11
- Introduction 11
- 1.2 Network Security Overview 12
- 1.3.3 System Components 13
- 1.3.4 Operating Modes 13
- 1.3.5 Deployment Options 14
- 1.4 This Document 15
- Chapter 2 16
- Installation 16
- 2.2 Preparation 17
- 2.2.2 Preparing the Network 18
- 2.2.3 Port Locations 18
- WARNING: The 19
- WARNING: To 19
- WARNING: If the 20
- 2.3 Installation Instructions 21
- 2.4 Outdoor Installation 21
- Clear for WAN Port 23
- CAUTION: The 24
- Non-Root, and click Apply 25
- 2.4.3 Weatherizing the Bridge 26
- 2.5 Indoor Installation 29
- 2.5.2 Configuring the Bridge 30
- Chapter 3 31
- Configuration 31
- 3.2 LAN Settings 32
- Multicast field 33
- 3.3 Radio Settings 34
- ANT1); Radio 2 uses an 35
- CAUTION: 36
- Distance setting on the 37
- Preamble setting of Short 37
- Preamble setting of Long 37
- 100 milliseconds 38
- AP radio mode on the VIRTUAL 40
- Edit button for each VAP 40
- RADIO SETTINGS screen.) 41
- Cleartext Security 42
- Fortress Security 42
- Open WEP and Shared WEP 42
- 802.1X Security 43
- WPA-PSK or WPA2-PSK be used 44
- WPA-Mixed-PSK) 44
- Edit button for 44
- 3.5 Bridge Passwords 46
- For security 47
- Normal operating mode meet 48
- 3.6.2 Secure Shell Access 49
- 3.6.3 Encryption Algorithm 49
- 3.6.4 Re-keying Interval 50
- 3.6.5 Access ID 50
- Global and Default Settings 51
- AUTHENTI 52
- CATION SETTINGS to point 52
- Mode field 52
- section of the 54
- Auth Mode, ensure 54
- 3.7 Blackout Mode 57
- 3.8 System Date and Time 58
- 3.10 Front-Panel Operation 59
- BLACKOUT MODE: Disabled), or 60
- Chapter 4 62
- Administration 62
- Allow. Such a device 63
- To edit a device: 64
- 4.2 User Authentication 65
- Local au 66
- To add a user: 67
- To edit a user account: 67
- To delete a user account: 68
- 4.3 Trusted Devices 69
- 4.3.1 Editing Trusted Devices 70
- 4.4 SNMP Settings 71
- 4.5 Backing Up and Restoring 72
- FIPS operating mode 73
- 4.6.1 Viewing 75
- Current Software Version 75
- Performing 76
- 4.7 Rebooting the Bridge 77
- Chapter 5 78
- Monitoring and Diagnostics 78
- 5.1.1 Traffic Statistics 79
- 5.1.2 Interface Statistics 79
- 5.2 Tracking 80
- 5.3 AP Associations 82
- 5.4 View Log 83
- 5.5 Diagnostics 85
- HOST MAC DATABASE: 86
- HOST MAC DATABASE button 86
- 5.6 Front-Panel Indicators 87
- 5.6.2 Radio LEDs 88
- 5.6.3 Port LEDs 89
- Chapter 6 90
- Command-Line Interface 90
- bits per second: 9600 91
- data bits: 8 91
- parity: none 91
- stop bits: 1 91
- hardware flow control: none 91
- 6.2 Getting Help in the CLI 92
- 6.3 Command Syntax 93
- 6.4.1 LAN Settings in the CLI 94
- Enter↵, to display the 95
- NOTE: The Bridge 96
- ANT1), while 96
- NOTE: If you are 96
- Enter↵ to leave the 96
- NOTE: Because 97
- Enter↵ to 99
- NOTE: Pa s s wo r d s 101
- NOTE: Usernames 101
- NOTE: Yo u c a n 102
- CAUTION: For se 103
- CAUTION: If you 104
- NOTE: Disabling 104
- NOTE: The 105
- Enter↵ to save them 105
- NOTE: Tr u s t e d D e 110
- CAUTION: Specify 110
- NOTE: You cannot 110
- FIPS op 110
- NOTE: The term 112
- 6.6.7 Pinging a Device 114
- 6.6.8 Tracing a Packet Route 114
- NOTE: Wir e le s s 115
- NOTE: You cannot 115
- Deployment with SAC 116
- 10.0.0.0–10.255.255.255 118
- 172.16.0.0–172.31.255.255 118
- 192.168.0.0–192.168.255.255 118
- <serialnumber> 123
- Chapter 7 124
- Specifications 124
- 7.1.4 Compliance 125
- 7.1.5 Logical Interfaces 125
- Chapter 8 127
- Troubleshooting 127
- Failed to decrypt 128
- Glossary 138
- Fortress : Glossary 139
Produits connexes et manuels pour Matériel Fortress-technologies ecure Wireless Access Bridge
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.024 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels