Fortress Technologies BreadCrumb Wireless Network Manuel d'utilisateur télécharger pdf (Page 40)

Chapter 5. Using BCAdmin™

a. IP Address

b. Subnet Mask

c. Default Gateway

d. DNS Server

You may need to contact your network administrator in order to determine the correct settings.

Forwarding Settings

The "Forwarding" tab contains controls for conﬁguring inbound NAT translation for BreadCrumb

devices conﬁgured as gateways.

Figure 5-11. BreadCrumb Properties - Forwarding Tab

To forward trafﬁc through a BreadCrumb device in Gateway Mode or Gateway (Ingress) mode, you must

know:

• The IPv4 port(s) used by the forwarded trafﬁc (e.g., 25 for SMTP, 80 for HTTP, etc.).

• The TCP protocol(s) used by the forwarded trafﬁc (TCP and/or UDP).

• The IPv4 address to which the forwarded trafﬁc is to be forwarded.

• The IPv4 port(s) at the destination address to which the forwarded trafﬁc is to be forwarded (usually

the same as the ports described above).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 64 65

Pas de commentaire

Fortress Technologies BreadCrumb Wireless Network Manuel d'utilisateur Page 40